Use the Device
1.Clean the device.
Your device and travel pouch should be cleaned before its first use. Carefully follow the cleaning
instructions in the Cleaning, Care & Charging section for the inner layer, outer layer and travel pouch to keep your mask in good condition.
2. Put on the device.
Once clean, place the device on clean, dry skin comfortably on your face and completely covering your eyes. Remove makeup, eyeglasses, and contact lenses prior to use.
3. Adjust the strap.
The strap should sit just above your ears. For a full light block experience, tighten the strap by adjusting the buckle. Moving it to the right makes it tighter and to the left makes it looser. The device should feel snug
on your face yet still comfortable.
4. Get into your desired sleeping position.
Find a comfortable sleeping position on your back, side or stomach and adjust the device to ensure it is secured.
5. Turn on the device.
Firmly press and hold the multi-functional power button located on the top center of the mask. The LED light on the button will turn on when the device is on.
6. Select a vibration pattern and intensity.
Press the same button to toggle through the three vibration patterns: Pulse, Wave, and Constant. Each vibration pattern has two intensity levels: low and high, with the first pattern starting
at low intensity. Press the button again to switch to high intensity or keep pressing to cycle through each vibration pattern and intensity level. With the stored memory feature, the device will remember the last vibration pattern used so that the next time you turn it on, the same pattern will start.
7. Relax and enjoy.
The full treatment will last for 15 minutes. The LED indicator will turn off 5 seconds after the treatment starts. The intensity level will gradually decrease as the treatment progresses.
8. Turn off the device.
The device will automatically shut off after the treatment is completed. Press the button at any point during the treatment to turn off the device. The LED light on the button will turn off when the device is off.
9. Lock the device.
When not in use or during transport, lock the device to prevent turning it on accidentally. Quickly press the button three times to initiate the lock function. The device will flash three times when successfully locked. Quickly press three times again to unlock. The device will flash three times when successfully unlocked
Use the Device
1.Clean the device.
Your device and travel pouch should be cleaned before its first use. Carefully follow the cleaning
instructions in the Cleaning, Care & Charging section for the inner layer, outer layer and travel pouch to keep your mask in good condition.
2. Put on the device.
Once clean, place the device on clean, dry skin comfortably on your face and completely covering your eyes. Remove makeup, eyeglasses, and contact lenses prior to use.
3. Adjust the strap.
The strap should sit just above your ears. For a full light block experience, tighten the strap by adjusting the buckle. Moving it to the right makes it tighter and to the left makes it looser. The device should feel snug
on your face yet still comfortable.
4. Get into your desired sleeping position.
Find a comfortable sleeping position on your back, side or stomach and adjust the device to ensure it is secured.
5. Turn on the device.
Firmly press and hold the multi-functional power button located on the top center of the mask. The LED light on the button will turn on when the device is on.
6. Select a vibration pattern and intensity.
Press the same button to toggle through the three vibration patterns: Pulse, Wave, and Constant. Each vibration pattern has two intensity levels: low and high, with the first pattern starting
at low intensity. Press the button again to switch to high intensity or keep pressing to cycle through each vibration pattern and intensity level. With the stored memory feature, the device will remember the last vibration pattern used so that the next time you turn it on, the same pattern will start.
7. Relax and enjoy.
The full treatment will last for 15 minutes. The LED indicator will turn off 5 seconds after the treatment starts. The intensity level will gradually decrease as the treatment progresses.
8. Turn off the device.
The device will automatically shut off after the treatment is completed. Press the button at any point during the treatment to turn off the device. The LED light on the button will turn off when the device is off.
9. Lock the device.
When not in use or during transport, lock the device to prevent turning it on accidentally. Quickly press the button three times to initiate the lock function. The device will flash three times when successfully locked. Quickly press three times again to unlock. The device will flash three times when successfully unlocked
Rezensionen
Es gibt noch keine Rezensionen.